Padlocks

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

The SureLock 25029 can be opened in two ways: with your personal 4-digit combination or with the included owner key. You can use the combination for everyday access and keep the key as a backup.

Unlike combination-only models, the SureLock 25029 includes owner key access. If you forget your code, use the backup key to open the lock. Once the lock is open, follow the normal reset procedure to set a new 4-digit combination.

TSA006 identifies the inspection keyway used by the SureLock 25029 for authorized baggage screening. The lock also gives the owner normal access through either the personal 4-digit combination or the included owner key.

The factory combination is 0000. With the lock open, move the reset switch into the setting position, choose your new 4-digit code, then slide the switch back to its normal position. Test the new combination several times while the lock is still open before using it.

Yes. The SureLock 25029 is listed as keyed alike, so locks supplied together in the same multipack can use the matching keys from that set. Do not assume that separately purchased packages use the same key.

The SureLock 25029 uses a heavy-duty rigid shackle measuring 0.24 in in diameter with approximately 1.10 in of vertical clearance. The lock measures 1.64 × 3.33 × 0.71 in and weighs about 6.04 oz. It is designed for compatible hard cases, equipment cases, camera cases, toolboxes, and similar gear. Measure the locking point before purchasing—the larger shackle may not fit narrow zipper pulls or small luggage lock openings.

No. Owners unlock the Giant 17067 with their 4-digit combination. The TSA008 keyway is intended for authorized security screening access and is not an owner keyway.

The Giant 17067 measures approximately 1.58 × 3.32 in and weighs 5.84 oz. It is intentionally larger and heavier than a typical luggage lock, making it better suited to heavy-duty cases, lockers, toolboxes, and professional travel equipment.

The Giant 17067 is designed for heavier-duty applications such as gym lockers, Pelican cases, large toolboxes, professional travel cases, and other compatible equipment. Because it is larger than a standard luggage lock, check the size and clearance of your attachment point before purchasing.

The Red Alert indicator provides a visible signal after the lock has been opened through the TSA inspection keyway. Opening the lock with your correct combination resets the indicator for future use.

The Giant 17067 uses a shackle-rotation reset system. Open the lock with the current combination, rotate the shackle 90 degrees until the notches align, press it down and rotate it to the reset position, then set your new 4-digit code. Return the shackle to its normal position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

The Giant 17067 does not have an owner master-reset function. If the lock is closed and the combination is forgotten, the code cannot simply be reset without first opening the lock with the correct combination. Always test and record your new code before locking it onto your equipment.

The Defender 2A837C has an adjustable rigid shackle that can be set from 1.57 to 3.85 in. The adjustable range provides extra reach for compatible gates, fence latches, lockers, sheds and storage hardware where a fixed shackle may be too short.

The hardened-steel shackle measures 0.27 in across. Before ordering, check that the opening in your gate latch, hasp, locker or other hardware is large enough for the shackle to pass through.

Fit depends on the size and position of the locking point. Measure the opening diameter, required shackle reach and surrounding clearance before ordering. The shackle adjusts from 1.57 to 3.85 in, but the adjustable design does not guarantee compatibility with every gate, hasp or locker.

No. The Defender 2A837C uses a resettable 4-digit combination for everyday access, so there is no personal key to carry or keep track of.

Yes. The 4-digit combination is resettable, allowing you to set and change your own code. A 4-digit system provides 10,000 possible number combinations from 0000 to 9999.

The standardized lock dimensions are 2.53 × 4.61 × 0.65 in, and the unit weight is 6.48 oz. The hardened-steel shackle measures 0.27 in across and adjusts from 1.57 to 3.85 in.

No. Owners unlock the ANVIL C106 with their personal 4-digit combination. The TSA007 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

No. The ANVIL C106 does not include a Search Alert or inspection indicator. It is a rigid-shackle 4-digit TSA combination padlock focused on straightforward combination access and TSA-compatible screening.

TSA007 identifies the inspection keyway used by the ANVIL C106. You use your personal 4-digit combination for normal access, while authorized security personnel with the compatible inspection tool can open the lock during baggage screening without needing your combination.

Open the lock with your current combination. Lift the shackle and rotate it 90° clockwise, press the shackle down, then rotate it another 90° to enter reset mode. Set your new 4-digit combination, then return the shackle to its normal position. Test the new code several times while the lock is still open before using it.

The TSA007 keyway is not an owner backup keyway. If the lock is closed and you forget your combination, you cannot simply reset the code without first opening the lock with the current combination. Test and securely record your new code before attaching the lock to your luggage or gear.

The ANVIL C106 uses a rigid hardened-steel shackle measuring approximately 0.13 in in diameter, with a 0.91 in shackle length and about 0.78 in of vertical clearance. Each lock weighs approximately 2.5 oz. It is suitable for compatible suitcase zipper pulls, backpacks, lockers, toolboxes, and cases with appropriately sized locking points. Measure the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 17021 with their personal 4-digit combination. The TSA007 keyway is intended for authorized security inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, letting you know your bag was inspected. Entering the correct combination and opening the lock resets the indicator for future use.

TSA007 identifies the inspection keyway used by the SureLock 17021. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

The SureLock 17021 uses a 4-digit combination with 10,000 possible codes, from 0000 to 9999. You can change the combination whenever needed, as long as you can open the lock and follow the normal reset procedure.

The TSA007 keyway is not a backup keyway for the owner. Before traveling, test your new combination several times while the lock is open and store the code in a secure place. If the lock is closed and you no longer know the combination, do not rely on the TSA keyway as an owner-access method.

The SureLock 17021 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.87 in of vertical clearance. Each lock weighs approximately 2.75 oz. It is designed for compatible suitcase zipper pulls, backpacks, lockers, toolboxes, and hard cases. Check the opening size and surrounding clearance before purchasing.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

The Defender 2A837C has an adjustable rigid shackle that can be set from 1.57 to 3.85 in. The adjustable range provides extra reach for compatible gates, fence latches, lockers, sheds and storage hardware where a fixed shackle may be too short.

The hardened-steel shackle measures 0.27 in across. Before ordering, check that the opening in your gate latch, hasp, locker or other hardware is large enough for the shackle to pass through.

Fit depends on the size and position of the locking point. Measure the opening diameter, required shackle reach and surrounding clearance before ordering. The shackle adjusts from 1.57 to 3.85 in, but the adjustable design does not guarantee compatibility with every gate, hasp or locker.

No. The Defender 2A837C uses a resettable 4-digit combination for everyday access, so there is no personal key to carry or keep track of.

Yes. The 4-digit combination is resettable, allowing you to set and change your own code. A 4-digit system provides 10,000 possible number combinations from 0000 to 9999.

The standardized lock dimensions are 2.53 × 4.61 × 0.65 in, and the unit weight is 6.48 oz. The hardened-steel shackle measures 0.27 in across and adjusts from 1.57 to 3.85 in.

No. Owners unlock the ANVIL C106 with their personal 4-digit combination. The TSA007 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

No. The ANVIL C106 does not include a Search Alert or inspection indicator. It is a rigid-shackle 4-digit TSA combination padlock focused on straightforward combination access and TSA-compatible screening.

TSA007 identifies the inspection keyway used by the ANVIL C106. You use your personal 4-digit combination for normal access, while authorized security personnel with the compatible inspection tool can open the lock during baggage screening without needing your combination.

Open the lock with your current combination. Lift the shackle and rotate it 90° clockwise, press the shackle down, then rotate it another 90° to enter reset mode. Set your new 4-digit combination, then return the shackle to its normal position. Test the new code several times while the lock is still open before using it.

The TSA007 keyway is not an owner backup keyway. If the lock is closed and you forget your combination, you cannot simply reset the code without first opening the lock with the current combination. Test and securely record your new code before attaching the lock to your luggage or gear.

The ANVIL C106 uses a rigid hardened-steel shackle measuring approximately 0.13 in in diameter, with a 0.91 in shackle length and about 0.78 in of vertical clearance. Each lock weighs approximately 2.5 oz. It is suitable for compatible suitcase zipper pulls, backpacks, lockers, toolboxes, and cases with appropriately sized locking points. Measure the opening and surrounding clearance before purchasing.

No. The SureLock 21011 is a keyed luggage lock, so there is no combination to set, remember, or reset. Simply use one of the included keys to lock and unlock it.

Keyed alike means that every lock in the same package can be opened with any of the keys included in that package. This makes it easier to manage multiple suitcases or bags without keeping track of a different key for each lock.

Do not assume that a key from a separately purchased 21011 package will open locks from another set. Keyed-alike compatibility applies to the locks and keys supplied together in the same package. Keep at least one spare key from each set in a separate safe place.

The current SureLock 21011 product listing states that each compact lock includes two keys. Because the locks within the same package are keyed alike, the included keys can be used across the locks in that set.

The SureLock 21011 is a compact mini padlock measuring approximately 1.57 × 0.71 in and weighing about 0.91 oz per lock. It is designed for compatible suitcase zipper pulls, backpacks, briefcases, small cases, toolboxes, and similar attachment points. Check the opening and surrounding clearance before purchasing.

Keep at least one included key in a separate safe place rather than carrying all of the keys together. If all keys for the set are lost, contact SureLock or LockSelect support for assistance. Do not assume that a key from another separately purchased 21011 set will match your locks.

No. Owners unlock the SureLock 17067 with their personal 4-digit combination. The TSA006 keyway is intended for authorized security inspection and is not an owner backup keyway.

The Open Alert indicator provides a visible signal after the lock has been opened through the TSA inspection keyway. Opening the lock with your correct combination resets the indicator for future use.

TSA006 identifies the inspection keyway used by the SureLock 17067. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

Open the lock with the current 4-digit code. Rotate the shackle 90 degrees counterclockwise until the notches align, press the shackle down, then rotate it another 90 degrees until it stops. Set your new code, then return the shackle to its normal position to finish.

The TSA006 keyway is not a backup keyway for the owner. Changing the combination requires the lock to be open, so test your new code several times before locking the case and keep a record of it in a secure place.

The SureLock 17067 uses a 0.24 in hardened-steel rigid shackle with approximately 0.70 in of internal width and 1.12 in of vertical clearance. The lock measures 1.59 × 3.33 × 0.70 in and weighs approximately 5.9 oz. Its larger format is well suited to compatible equipment cases, Pelican or Nanuk-style cases, lockers, toolboxes, and luggage. Check your attachment-point dimensions before purchasing.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The long-shackle CL-42 provides additional reach for applications such as gates, fences, sheds, hasps, and storage latches. Because gate and hasp hardware varies considerably, measure the opening diameter, required reach, and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

No. The SureLock 21011 is a keyed luggage lock, so there is no combination to set, remember, or reset. Simply use one of the included keys to lock and unlock it.

Keyed alike means that every lock in the same package can be opened with any of the keys included in that package. This makes it easier to manage multiple suitcases or bags without keeping track of a different key for each lock.

Do not assume that a key from a separately purchased 21011 package will open locks from another set. Keyed-alike compatibility applies to the locks and keys supplied together in the same package. Keep at least one spare key from each set in a separate safe place.

The current SureLock 21011 product listing states that each compact lock includes two keys. Because the locks within the same package are keyed alike, the included keys can be used across the locks in that set.

The SureLock 21011 is a compact mini padlock measuring approximately 1.57 × 0.71 in and weighing about 0.91 oz per lock. It is designed for compatible suitcase zipper pulls, backpacks, briefcases, small cases, toolboxes, and similar attachment points. Check the opening and surrounding clearance before purchasing.

Keep at least one included key in a separate safe place rather than carrying all of the keys together. If all keys for the set are lost, contact SureLock or LockSelect support for assistance. Do not assume that a key from another separately purchased 21011 set will match your locks.

No. Owners unlock the SureLock 17021 with their personal 4-digit combination. The TSA007 keyway is intended for authorized security inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, letting you know your bag was inspected. Entering the correct combination and opening the lock resets the indicator for future use.

TSA007 identifies the inspection keyway used by the SureLock 17021. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

The SureLock 17021 uses a 4-digit combination with 10,000 possible codes, from 0000 to 9999. You can change the combination whenever needed, as long as you can open the lock and follow the normal reset procedure.

The TSA007 keyway is not a backup keyway for the owner. Before traveling, test your new combination several times while the lock is open and store the code in a secure place. If the lock is closed and you no longer know the combination, do not rely on the TSA keyway as an owner-access method.

The SureLock 17021 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.87 in of vertical clearance. Each lock weighs approximately 2.75 oz. It is designed for compatible suitcase zipper pulls, backpacks, lockers, toolboxes, and hard cases. Check the opening size and surrounding clearance before purchasing.

No. Owners unlock the SureLock 17067 with their personal 4-digit combination. The TSA006 keyway is intended for authorized security inspection and is not an owner backup keyway.

The Open Alert indicator provides a visible signal after the lock has been opened through the TSA inspection keyway. Opening the lock with your correct combination resets the indicator for future use.

TSA006 identifies the inspection keyway used by the SureLock 17067. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

Open the lock with the current 4-digit code. Rotate the shackle 90 degrees counterclockwise until the notches align, press the shackle down, then rotate it another 90 degrees until it stops. Set your new code, then return the shackle to its normal position to finish.

The TSA006 keyway is not a backup keyway for the owner. Changing the combination requires the lock to be open, so test your new code several times before locking the case and keep a record of it in a secure place.

The SureLock 17067 uses a 0.24 in hardened-steel rigid shackle with approximately 0.70 in of internal width and 1.12 in of vertical clearance. The lock measures 1.59 × 3.33 × 0.70 in and weighs approximately 5.9 oz. Its larger format is well suited to compatible equipment cases, Pelican or Nanuk-style cases, lockers, toolboxes, and luggage. Check your attachment-point dimensions before purchasing.

No. Owners unlock the SureLock 17021 with their personal 4-digit combination. The TSA007 keyway is intended for authorized security inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, letting you know your bag was inspected. Entering the correct combination and opening the lock resets the indicator for future use.

TSA007 identifies the inspection keyway used by the SureLock 17021. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

The SureLock 17021 uses a 4-digit combination with 10,000 possible codes, from 0000 to 9999. You can change the combination whenever needed, as long as you can open the lock and follow the normal reset procedure.

The TSA007 keyway is not a backup keyway for the owner. Before traveling, test your new combination several times while the lock is open and store the code in a secure place. If the lock is closed and you no longer know the combination, do not rely on the TSA keyway as an owner-access method.

The SureLock 17021 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.87 in of vertical clearance. Each lock weighs approximately 2.75 oz. It is designed for compatible suitcase zipper pulls, backpacks, lockers, toolboxes, and hard cases. Check the opening size and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. Owners unlock the SureLock 23026 with their personal 3-digit combination. The TSA008 keyway is intended for authorized baggage inspection and is not an owner backup keyway.

The red Open Alert indicator pops up after the lock has been opened through the TSA inspection keyway, giving you a visible sign that your bag was inspected. Opening the lock with your correct combination resets the indicator for future use.

TSA008 identifies the inspection keyway used by the SureLock 23026. You use your 3-digit combination for normal access, while authorized security officers with the compatible inspection tool can open and re-lock the lock during baggage screening without knowing or changing your personal code.

The factory combination is 000. Open the lock with the current code, move the reset switch into the setting position, choose your new 3-digit combination, then return the switch to its normal position. Test the new code several times while the lock is still open before using it.

The TSA008 keyway is not an owner backup keyway. If the lock is closed and you forget the combination, the code cannot simply be reset without first opening the lock with the correct combination. Test your new code before closing the lock and keep a record of it in a secure place.

The SureLock 23026 uses a rigid shackle measuring 0.14 in in diameter with approximately 0.76 in of vertical clearance. The lock measures 1.29 × 2.46 × 0.55 in and weighs about 2.33 oz. It is designed for compatible suitcase zipper pulls, backpacks, gym and school lockers, toolboxes, laptop bags, and other small locking points. Check the opening and surrounding clearance before purchasing.

No. The SureLock 21011 is a keyed luggage lock, so there is no combination to set, remember, or reset. Simply use one of the included keys to lock and unlock it.

Keyed alike means that every lock in the same package can be opened with any of the keys included in that package. This makes it easier to manage multiple suitcases or bags without keeping track of a different key for each lock.

Do not assume that a key from a separately purchased 21011 package will open locks from another set. Keyed-alike compatibility applies to the locks and keys supplied together in the same package. Keep at least one spare key from each set in a separate safe place.

The current SureLock 21011 product listing states that each compact lock includes two keys. Because the locks within the same package are keyed alike, the included keys can be used across the locks in that set.

The SureLock 21011 is a compact mini padlock measuring approximately 1.57 × 0.71 in and weighing about 0.91 oz per lock. It is designed for compatible suitcase zipper pulls, backpacks, briefcases, small cases, toolboxes, and similar attachment points. Check the opening and surrounding clearance before purchasing.

Keep at least one included key in a separate safe place rather than carrying all of the keys together. If all keys for the set are lost, contact SureLock or LockSelect support for assistance. Do not assume that a key from another separately purchased 21011 set will match your locks.

No. The SureLock 21011 is a keyed luggage lock, so there is no combination to set, remember, or reset. Simply use one of the included keys to lock and unlock it.

Keyed alike means that every lock in the same package can be opened with any of the keys included in that package. This makes it easier to manage multiple suitcases or bags without keeping track of a different key for each lock.

Do not assume that a key from a separately purchased 21011 package will open locks from another set. Keyed-alike compatibility applies to the locks and keys supplied together in the same package. Keep at least one spare key from each set in a separate safe place.

The current SureLock 21011 product listing states that each compact lock includes two keys. Because the locks within the same package are keyed alike, the included keys can be used across the locks in that set.

The SureLock 21011 is a compact mini padlock measuring approximately 1.57 × 0.71 in and weighing about 0.91 oz per lock. It is designed for compatible suitcase zipper pulls, backpacks, briefcases, small cases, toolboxes, and similar attachment points. Check the opening and surrounding clearance before purchasing.

Keep at least one included key in a separate safe place rather than carrying all of the keys together. If all keys for the set are lost, contact SureLock or LockSelect support for assistance. Do not assume that a key from another separately purchased 21011 set will match your locks.

No. The SureLock 21011 is a keyed luggage lock, so there is no combination to set, remember, or reset. Simply use one of the included keys to lock and unlock it.

Keyed alike means that every lock in the same package can be opened with any of the keys included in that package. This makes it easier to manage multiple suitcases or bags without keeping track of a different key for each lock.

Do not assume that a key from a separately purchased 21011 package will open locks from another set. Keyed-alike compatibility applies to the locks and keys supplied together in the same package. Keep at least one spare key from each set in a separate safe place.

The current SureLock 21011 product listing states that each compact lock includes two keys. Because the locks within the same package are keyed alike, the included keys can be used across the locks in that set.

The SureLock 21011 is a compact mini padlock measuring approximately 1.57 × 0.71 in and weighing about 0.91 oz per lock. It is designed for compatible suitcase zipper pulls, backpacks, briefcases, small cases, toolboxes, and similar attachment points. Check the opening and surrounding clearance before purchasing.

Keep at least one included key in a separate safe place rather than carrying all of the keys together. If all keys for the set are lost, contact SureLock or LockSelect support for assistance. Do not assume that a key from another separately purchased 21011 set will match your locks.

No. Owners unlock the SureLock 17067 with their personal 4-digit combination. The TSA006 keyway is intended for authorized security inspection and is not an owner backup keyway.

The Open Alert indicator provides a visible signal after the lock has been opened through the TSA inspection keyway. Opening the lock with your correct combination resets the indicator for future use.

TSA006 identifies the inspection keyway used by the SureLock 17067. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

Open the lock with the current 4-digit code. Rotate the shackle 90 degrees counterclockwise until the notches align, press the shackle down, then rotate it another 90 degrees until it stops. Set your new code, then return the shackle to its normal position to finish.

The TSA006 keyway is not a backup keyway for the owner. Changing the combination requires the lock to be open, so test your new code several times before locking the case and keep a record of it in a secure place.

The SureLock 17067 uses a 0.24 in hardened-steel rigid shackle with approximately 0.70 in of internal width and 1.12 in of vertical clearance. The lock measures 1.59 × 3.33 × 0.70 in and weighs approximately 5.9 oz. Its larger format is well suited to compatible equipment cases, Pelican or Nanuk-style cases, lockers, toolboxes, and luggage. Check your attachment-point dimensions before purchasing.

No. Owners unlock the SureLock 17067 with their personal 4-digit combination. The TSA006 keyway is intended for authorized security inspection and is not an owner backup keyway.

The Open Alert indicator provides a visible signal after the lock has been opened through the TSA inspection keyway. Opening the lock with your correct combination resets the indicator for future use.

TSA006 identifies the inspection keyway used by the SureLock 17067. You use your 4-digit combination for normal access, while authorized security officers with the compatible inspection key can open and re-lock the lock during baggage screening without knowing your personal code.

Open the lock with the current 4-digit code. Rotate the shackle 90 degrees counterclockwise until the notches align, press the shackle down, then rotate it another 90 degrees until it stops. Set your new code, then return the shackle to its normal position to finish.

The TSA006 keyway is not a backup keyway for the owner. Changing the combination requires the lock to be open, so test your new code several times before locking the case and keep a record of it in a secure place.

The SureLock 17067 uses a 0.24 in hardened-steel rigid shackle with approximately 0.70 in of internal width and 1.12 in of vertical clearance. The lock measures 1.59 × 3.33 × 0.70 in and weighs approximately 5.9 oz. Its larger format is well suited to compatible equipment cases, Pelican or Nanuk-style cases, lockers, toolboxes, and luggage. Check your attachment-point dimensions before purchasing.