Dual-Access Locks

The SureLock 25029 can be opened in two ways: with your personal 4-digit combination or with the included owner key. You can use the combination for everyday access and keep the key as a backup.

Unlike combination-only models, the SureLock 25029 includes owner key access. If you forget your code, use the backup key to open the lock. Once the lock is open, follow the normal reset procedure to set a new 4-digit combination.

TSA006 identifies the inspection keyway used by the SureLock 25029 for authorized baggage screening. The lock also gives the owner normal access through either the personal 4-digit combination or the included owner key.

The factory combination is 0000. With the lock open, move the reset switch into the setting position, choose your new 4-digit code, then slide the switch back to its normal position. Test the new combination several times while the lock is still open before using it.

Yes. The SureLock 25029 is listed as keyed alike, so locks supplied together in the same multipack can use the matching keys from that set. Do not assume that separately purchased packages use the same key.

The SureLock 25029 uses a heavy-duty rigid shackle measuring 0.24 in in diameter with approximately 1.10 in of vertical clearance. The lock measures 1.64 × 3.33 × 0.71 in and weighs about 6.04 oz. It is designed for compatible hard cases, equipment cases, camera cases, toolboxes, and similar gear. Measure the locking point before purchasing—the larger shackle may not fit narrow zipper pulls or small luggage lock openings.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The short-shackle CL-42 uses a hardened-steel shackle measuring 0.31 in in diameter with approximately 1.47 in of vertical clearance. It is designed for closer-fit applications such as lockers, cabinets, toolboxes, and storage boxes. Measure the opening and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

Use the included backup key to unlock the Ironclad CL-42 if you forget your combination. Once the lock is open, you can recover access and reset the 4-digit code using the normal reset procedure. Keep at least one backup key in a separate safe place.

Yes. The Ironclad CL-42 is a dual-access padlock. For everyday use, you can unlock it with your 4-digit combination or use the included owner key as a backup access method.

The Ironclad CL-42 uses a resettable 4-digit combination. Open the lock first, then use the included reset tool and follow the supplied instructions to set your new code. The combination can be changed again whenever needed as long as you have access to the open lock.

No. The Ironclad CL-42 is a general-purpose combination padlock with owner-key backup. It is designed for applications such as lockers, gates, sheds, cabinets, toolboxes, and storage rather than TSA luggage inspection access.

The long-shackle CL-42 provides additional reach for applications such as gates, fences, sheds, hasps, and storage latches. Because gate and hasp hardware varies considerably, measure the opening diameter, required reach, and surrounding clearance before ordering.

Yes. The Ironclad CL-42 is designed for both indoor and outdoor use. It combines a protective outer shell, zinc alloy body, and hardened-steel shackle for everyday exposure to rain, handling, and outdoor storage environments.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

Yes. The OX Edge TS-431B is a dual-access lock. You can open it with your 4-digit combination or use the included owner key as a backup access method.

If you forget your combination, you can use the included owner key to open the OX Edge TS-431B. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

Locks purchased in the same OX Edge package are keyed alike, so the included owner keys work with the locks in that set. Do not assume that a key from a separately purchased OX Edge package will open another set.

The OX Edge TS-431B uses a parallel-press reset system. Open the lock with the current code, rotate the shackle 180 degrees until it is parallel with the lock body, press the shackle down gently, set your new 4-digit code, then pull the shackle back up and return it to the locking position. For detailed instructions, see our How to Set Forge TSA Lock guide.

The OX Edge TS-431B uses a rigid hardened-steel shackle measuring 0.13 in in diameter with approximately 0.98 in of vertical clearance. The lock body measures 1.3 × 2.72 × 0.55 in. Check the opening size and surrounding clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA006 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.

The Guardian TS-431 includes an owner key as a backup way to unlock your lock. The TSA007 inspection system is for authorized airport security access. You can use either your 4-digit combination or the included owner key for everyday access—you do not need a TSA master key.

The included owner key gives you a backup way to open the Guardian TS-431 if you forget your combination. Once the lock is open, you can follow the normal reset procedure to set a new 4-digit code. Keep at least one owner key in a separate safe place when traveling.

The Guardian TS-431 uses a rigid steel shackle measuring 0.14 in in diameter with approximately 1.09 in of vertical clearance. The lock body measures 1.22 × 2.63 × 0.52 in. Check the opening and clearance of your zipper pulls, case, locker, or other attachment point before purchasing.

The Guardian TS-431 uses a parallel-press reset system. Open the lock with the current combination, rotate the shackle 180 degrees so it is parallel to the lock body, press it down gently, then set your new 4-digit code. Pull the shackle back up and return it to the locking position when finished. For detailed instructions, see our How to Set Forge TSA Lock guide.

No. TSA inspection access does not change your personal 4-digit combination. Airport security can use the TSA007 inspection system to open and re-lock the lock without knowing or changing your code.

The Guardian TS-431 uses a resettable 4-digit combination with 10,000 possible codes from 0000 to 9999. You can change your combination whenever needed, as long as you can open the lock before entering reset mode.